Design of enhanced MT-RJ type connector for physical contact

An enhanced MT-RJ type connector was constructed employing a compact two-fiber ferrule in a newly designed housing for high-density optical duplex connection. The ferrule and the connector housing is designed to achieve physical contact (PC). As a result, the connectors we fabricated perform very well and provide ease of operation by means of direct core endface contact between the plugs. This connector is highly effective for use in the duplex connection of advanced optical networks.     

Structural and electrical studies of plasma-deposited polycrystalline silicon thin-films for photovoltaic application

Plasma-deposited polycrystalline Si films [or microcrystalline Si (μc-Si) films] produced by plasma enhanced chemical vapor deposition (PECVD) have attracted considerable attention as novel, low-cost and stable materials for the photovoltaic i-layer in p–i–n junction thin-film solar cells. The μc-Si films prepared under various deposition conditions show widely various microstructures, from a crystalline–amorphous mixed state to an almost perfect crystalline state, with different crystallographic orientations. These structural changes directly influence the carrier transport properties that play a dominant role in determining photovoltaic performance. Furthermore, obtaining a uniform built-in electric field throughout the i-layer is a crucial issue for achieving excellent photovoltaic performance. To obtain a uniform electric field, the following terms should be required for the i-layer: ‘truly’ intrinsic characteristic (or not n-type characteristics) as well as structural uniformity in the growth direction without an incubation layer. Here, structural properties of μc-Si for achieving truly intrinsic characteristics are reviewed with an emphasis on collations with the crystalline volume function and the degree of (2 2 0) crystallographic preferential orientation in the crystalline phase. In addition, we reviewed a growth mechanism for the μc-Si film that is actually used in the photovoltaic i-layer in highly efficient solar cells: hybrid-phase growth consisting of conventional vapor-phase growth at the surface and the solid-phase crystallization that simultaneously occurs in the film. That growth is very effective in producing structural uniformity along the growth direction and for formation of crystallites directly on the underlying doped layer.     

Marangoni flow at the gas/melt interface of steel

Direct observation with a scanning laser microscope was made to determine the direction and velocity of surface flow of steel melt in the vicinity of the solid/melt (S/M) interface. During solidification, a fast solutal Marangoni flow moving away from the S/M interface was confirmed to exist on steel melts containing oxygen and sulfur of 10 to 105 ppm. Even in such a low range of oxygen and sulfur content, the solutal Marangoni flow can be very fast, carrying inclusion particles up to the free surface along the S/M interface. During heating and holding, however, a thermal Marangoni flow combined with convective flow generated a reverse flow directed toward the S/M interface. These features have important relevance to inclusion entrainment and solute segregation during the solidification of steel. This article is based on a presentation given in the Mills Symposium entitled “Metals, Slags, Glasses: High Temperature Properties & Phenomena,” which took place at The Institute of Materials in London, England, on August 22–23, 2002.     

Managing networks of communities of practice for organizational knowledge creation A Knowledge Management imperative in the era of globalization

This article explores some imperatives of Knowledge Management for organizational knowledge creation in the era of globalization. As the transformation of Knowledge Management practices of Japanese firms in 1990s shows, Nonaka and TakeuchVs original model of organizational knowledge creation needs to be expanded by incorporating the concept of “community of practice” as the “engine” of knowledge creation. As an attempt for such expansion, it proposes a model of knowledge-creating organization as a self-organizing network of interactive, overlapping, and self-managing communities of practice. This article also explores some organizational conditions and managerial implications to prevent “malfunction” of communities of practice in the threats of globalization and to facilitate their dynamic evolution. Knowledge-creating organizations and their managers need to give due recognition to and support for “differences” that exist not only among diverse communities of practices but also within each communities. At a micro level approach, they need to “empower” community members by encouraging “ story-telling” or “narrative” of members’ lives in the communities and by assuring “transparency” of activities and resources to the members. As a macro level approach, they need to develop a “communitarian” organizational structure that fits to organizational knowledge creation in “multiculturalization” of societies.     

Heterochrony and evolvability in neural network development

Recent studies in evolutionary computation have focused on using developmental processes together with genetic algorithms in order to achieve more complex designs. Although several models have been proposed, their growth dynamics, and their interactions with evolutionary algorithms are still poorly understood. One particularly neglected concept in artificial developmental systems is heterochrony: how evolution affects development by changing the timing and rate of developmental events. In this article we attempt to address this issue by analyzing heterochronic changes in a well-known artificial developmental model, the cellular encoding model, by using a previously developed heterochrony framework. We have conducted experiments by evolving networks to solve a Boolean problem, and analyzed heterochronic changes in both successful and unsuccessful runs. Our findings show that owing to its properties, the cellular encoding model strongly affects the developmental dynamics and the heterochronic changes that occur during evolution. Our experiments also show that hypermorphic changes (a kind of heterochronic occurrence) lead to greater evolvability in successful runs.     

Trunk motion control during the flight phase while hopping considering angular momentum of a humanoid

In previous studies, various stabilizing control methods for humanoids during the stance phase while hopping and running were proposed. Although these methods contribute to stability while hopping and running, it is possibility that the control during the flight phase could also affect the stability. In this study, we investigated whether the control during the flight phase can affect the stability of a humanoid while running. To achieve stable hopping, we developed a control system that accounts for the angular momentum of the whole body during the flight phase. In this system, the angular momentum generated by the motion of the lower body in each time interval is calculated during the flight phase, and the trunk joints are controlled to generate the angular momentum necessary to compensate for the deviation of the waist posture, which is used as the reference point for the motion coordinate system of the robot. Once the proposed control system was developed and simulated, we found that the hopping duration in the unconstrained state was extended.     

Crystallographic Texture Development in Bismuth Sodium Titanate Prepared by Reactive-Templated Grain Growth Method

Bi_0.5Na_0.5TiO₃ (BNT) and 0.94Bi_0.5Na_0.5TiO₃·0.06BaTiO₃ (BNT–BT) bulk ceramics with extensive 〈100〉 texture were prepared by the reactive-templated grain growth method, using platelike Bi₄Ti₃O₁₂ (BIT) particles as templates for BNT. Calcined compacts were composed of matrix grains with random orientation and 〈100〉-oriented grains transformed from aligned BIT particles, and the texture developed by the growth of oriented grains during sintering. Ceramics with extensive texture were obtained by using the starting mixture containing the maximum concentration of platelike BIT to form the maximum volume fraction of oriented grains.     

Anionic polymerization of styrene in 2-methyltetrahydrofuran: temperature dependence of the field effect

Kinetics of living anionic polymerizations of styrene was investigated for lithium, sodium, and potassium salts in 2-methyltetrahydrofuran at 35, 25, 0, and ?70°C in the presence and absence of a high intensity electric field. At 35 and 25°C, a field acceleration effect was observed whereas no effect was found at 0 and ?70°C. The propagation rate constant of ion pairs was almost independent of gegen ions and their temperature dependence was smaller than that of free anions. The free ions seem to be more strongly solvated as the temperature decreases.     

ARCOR,a new photolithography technique with antireflective coating on resist

The multiple interference effect is one of the major causes of the fluctuation in critical dimension control (CD) and in mark detection for alignment. Suppressing this effect is critical for future photolithography. We propose a new photolithography technique called anti reflective coating on resist (ARCOR), which improves linewidth accuracy and overlay accuracy by suppressing multiple interference. ARCOR consists of relatively simple processes: A clear antireflective film is spun onto the resist prior to the mark detecting for alignment and exposure. The film is subsequently removed and the resist developed in the conventional way. ARCOR differs from ARC, which suppresses the reflection at the resist/substrate interface. ARCOR suppresses the reflection at the air/resist interface. ARCOR allows mark detection and exposure without light intensity-loss and multiple interference. The experiments mainly examine polysiloxane and perfluoroalkylpolyether as ARCOR materials. It is shown that linewidth accuracy can be improved from 0.3 to 0.03 μm. The signal-to-noise ratio of the alignment signal is drastically improved, and the overlay error is about half that of the conventional method. ARCOR is also effective for directly measuring the reflectivity at the resist/substrate interface, which is a key parameter of the multiple interference effect and the halation. Using ARCOR and a thin resist film, the measured ratio of reflected light to incident light indicates the reflectivity at the resist/substrate interface. Because, the probe light does not reflect off the resist surface and the intensity-loss at the resist surface is suppressed. With perfluoroalkylpolyether film, the measurement error is ～ 1.5%.     

Fracture behavior of poly(vinyl chloride)/methyl methacrylate/butadiene/styrene polymer blends

The fracture mode of poly(vinyl chloride)/methyl methacrylate/butadiene/styrene (PVC/MBS) polymer blends can change from ductile to brittle in accordance with the changes in shape of the test specimen or test conditions. Therefore, the mechanisms of impact energy absorption and the main cause of stress whitening are complicated. The following results on PVC/MBS blends were obtained by carrying out fracture experiments at different test speeds and temperatures:

• (1) The ductile/brittle fracture mode of the PVC and PVC/MBS blends can be explained by σ (the craze initiation stress)/σ_y (the shear yield initiation stress), which depends on the strain rates and temperature.
• (2) The fracture behavior of the PVC/MBS blends can be classified into the following types from the standpoints of fracture mode and whitening degree: Fracture I: ductile fracture without whitening; Fracture II: ductile fracture with whitening; and Fracture III: brittle fracture without whitening.
• (3) The following concepts can be estimated from the measurements of yield stress, specific gravity and SEM, TEM and visual observations. In Fracture I, shear yield occurs mainly. In Fracture II, both shear yield and crazing occur. In Fracture III, deformation of the rubber and local crazing occur.
• (4) The main cause of stress whitening in PVC/MBS blends is light scattering by cavities in the rubber particles.
• (5) In Fracture II, at first, crazes with cavities in the rubber particles occur. Then, shear yield occurs. Finally, crazes are healed by the heat, and only the cavities in the rubber remain.